64 Hours Work Motion detection CMOS HR DVR Tissue Box Covert Camera AV OUT 32GB 1280X720 LCD Display

3.Operation Instruction

(1) Turn ON/OFF
1, Long press the ON/OFF key to turn on or off the unit.

2, When the charger is connected, DVR turns on automatically; when the charger is disconnected, DVR turns off automatically 5 seconds later.

(2) Record mode

After power on, DVR goes into record mode and starts recording automatically. Now the record indicator flashes. During recording, press the OK key to stop.

(3) Photo mode

After power on, press Mode key and select photo mode, then press OK take picture.

(4) Preview mode

Turn the unit on and press the Mode key to select the preview mode. Press the Up/Down key to select the desired video file. Press OK key to play or pause. Press Mode key to exit.

(5) AV OUT function

Connect the DVR to output terminal like definition TV with AV connecting line; video can be recorded or browsed/played on the TV.

(6) Screen saver

With DVR in standby or recording mode, short press the ON/OFF key to turn on or off the screen saver function.

(7) Motion detection function

Set the system menu < Motion detection >  to  to start the motion detection function. the motion detection recording mode, the system will automatically detect the viewfinder screen movement, and if the screen stationary, then the system does not record, if the picture has changed (including the screen with a moving object or light shading), the system will automatically open the video, for each video, when the three-minute video ends, the device will pause the video and save video files, wait for the next video change of the screen and viewfinder to automatically start recording, To exit motion detection mode, it turn off the motion detection function;

(8) Date and Time Setting

After power on, press Menu key to enter the setup options menu, press the Down key to select “Date Setting” and OK key to go to the next level of menu. Use Mode/Switch/Up/Down keys to adjust the year, month, date and time. When all setting are completed, press OK key to confirm and exit.

(9) Charging

The DVR can be charged by connecting to DC 5V charger, USB 5V charger or USB interface of computer. During the process of charging, red indicator is solid on. After full charged, the red light turns off.

(10) Connecting computer

1. U disk function: Connect the computer with USB data line; select USB-Disk option on the DVR display screen, press OK key to enter the U disk mode.

2. PC camera function: Connect the computer with USB data line; Press the Down key on the DVR screen to select PC-Camera option. Press the OK key to enter PC-Camera mode. Now a standard video equipment will appear on the computer.

3. Record using computer USB: Connect the DVR to computer with USB data line; select REC-Mode option on the DVR display screen, press the OK key to enter record mode.

(11) System Reset

If DVR goes wrong during the process of service, press the Reset key, the system will reset and restore default settings.