Working frequency between detector and alarm host(315M/433M optional)
Eight controller works LED
External power failure alarm
Start-time:less than 1s
Alarm response time
Less than 10s (GSM in normality)
Power requirements:AC 220V 50Hz (optional)
Power consumption:than 3W
Standby battery:DC 8.4V
Standby battery working hours:more than 10 Hours
Introduction:
The PATROL HWAK alarm system adopts SMS data transmission and voice platform of GSM network to send control command and receive alarm remotely
The system can be set delayed-arm
When a signal is detected by detectors,the detectors will send alarm signal to host immediately,then the host sends alarm SMS to its pre-set mobile phone numbers,and meanwhile dials its pre-set telephone/mobile phone numbers automatically and drive wiretap
In addition,users can dial the system and set it in arm/disarm mode by any remote phones
Main Function:
Support wired and wireless detectors
Adapt wavecom double frequency GSM module
9 wireless guarding zones(1 SOS alarm zone,1 fire alarm zone,1 external power failure alarm zone,the other 6 wireless guarding zones can be defined by user),2 hardwire guarding zones
Send SMS to 3 mobile phones automatically while alarming
Call 3 phones automatically while alarming and drive wiretap
Arm/disarm by wireless keyboard,remote controller,SMS or remote telephone/mobile phone
Set the host by wireless keyboard,SMS or remote phone
Report guarding zones remotely by SMS or voice
Modify the name of wireless guarding zones and inquire the status of host by SMS demand
With voice reminder while the host is working
Support dialog
With standby rechargeable battery
The alarm host automatically stores system status,while its power is off